High-quality products, high-quality service, so that every customer satisfaction is our purpose!

Machinery and Equipment
  • Dust removal spray machine

    Dust removal spray machine

    Scope of application: Humidification, cooling, and dust reduction on construction sites; Environmental protection industry, mines, coal yards, terminals, steel mills and other dusty construction sites for dust removal and cooling and humidification; Forest protection, urban landscaping, spraying of trees and trees to prevent pests and diseases; City streets, station terminals, school airports, public places, garbage sites, sanitation and epidemic prevention, etc., disinfection, dust removal and cooling.​

  • Screw air compressor

    Screw air compressor

    Features 1Save the loss during unloading. When the gas volume of the fixed-frequency screw machine fluctuates, the motor will consume 45% of electricity when it is unloaded; the permanent-magnet inverter air compressor is not unloaded, and there is no waste. 2 to save the loss of pressure difference. In order to avoid the frequent start of the impact on the unit and the power grid, the fixed-frequency screw machine sets the 1-2BAR differential pressure; the variable-frequency screw air compressor can start and stop indefinitely, only one pressure point. Each time the pressure difference is 0.14 BAR, the system energy saving is 5~7%. 3 Save energy consumption at startup. The starting current of the fixed-frequency screw air compressor is 3-6 times of the rated current, and the frequent start-up greatly consumes electricity; the permanent-magnet inverter air compressor starts with a soft start, and the maximum current does not exceed the rated current.

  • welding machine

    welding machine

    The welding machine with over-voltage, under-voltage, over-current, overload automatic protection functions. Portable welding machine high efficiency, low no-load loss and more energy saving. With automatic compensation function for power grid voltage fluctuations. Easy arc starting. Small spatter, low noise, stable welding current and good forming.

  • concrete mixer machine

    concrete mixer machine

    1. This concrete mixer machine is Smooth operation, low noise and no disturbance to the people. 2. This concrete mixer machine is Good mixing quality, high production efficiency and low energy consumption. 3. This concrete mixer machine is High degree of automation and simple operation. 4.This concrete mixer machine is Simple structure, easy to move and low maintenance cost. It is suitable for general construction sites, roads, bridges, hydropower and other projects, and is especially suitable for construction in urban residential areas.

  • Roof panel roll forming machines

    Roof panel roll forming machines

    Two levels wave and trapezoid tile roll forming machine with cutting systerm is operated by a computer. It is easy to operate and can be set up in many languages to meet the needs of customers in many countries and regions. Two levels wave and trapezoid tile roll forming machine with cutting systerm is made up of laying out, forming and post-forming cutting. Its color plate has smooth and beautiful appearance, uniform paint pattern, high strength and durability. It is widely used in industrial and civil buildings, such as factory buildings, warehouses, gymnasiums, exhibition halls, cinemas and other rooms and walls. Two levels wave and trapezoid tile roll forming machine with cutting systerm using high quality steel products, complete product types and models.The technical performance index has reached the advanced level at home and abroad. Two levels wave and trapezoid tile roll forming machine with cutting systerm Special design and facture can be carried out according to user's requirements, and at the same time adapt to market changes, constantly upgrade and update.

  • Button heading machine

    Button heading machine

    The auto bar moving machine matched with cutter and heading machine together,achieve to auto cutting,heading and moving bar away way .NC controller,mote adopts VFD,accurate speed,stably work,handle and Automatic way change any time,it can work in any where,easy installation,energy-efficient,after sale service with commercial cost.

  • Tension jack machine

    Tension jack machine

    Tension machine is a kind of feedthrough pre-tensioing jack with a tension rod in the center, having 4 types of tensioning strength, namely: 1000 KN, 2000 KN, 3000 KN, 4000 KN. As the end of the tension rod is connected to the anchor with thread, it can be applied to various forged anchors, chilled iron anchor used for stayed-cable bridge and other similar anchors, as well as pre-tension pulling for pipes. In accordance with actual requirement, the support of two heavy-weight jacks can be replaced with a baseplate and rolling hinged bearing provided by the manufacturer, to be used as a vertical jack, or for horizontal pushing during installation. The customer can also demand a change in thread specifications for the connection of the anchor to enlarge the scope of application.

  • Diesel forklift truck

    Diesel forklift truck

    1.Equipped with Chinese powerful and reliable engines with excellent environmental performance; 2.Equipped with OPS or ORS seat and brake switch to prevent incorrect operation and secure the driver and the forklift from all sides. 3.install optional three-way catalytic device to lower the harmful emission beside of low emission engines; Adopt soundproof cotton to ease noise and high exhaust system as option to reduce dust.

  • vertical concrete pipe making machine

    vertical concrete pipe making machine

    Vertical radial extrusion pipe manufacturing technology as a new type of pipe manufacturing technology has the greatest advantage of using dry and hard concrete, vertical production can be immediately demoulded.Instantaneous extrusion molding, each tubeonly 2 to 4 minutes, high production efficiency. The radial extrusion pipe-making machine issuitable for producing small and medium-sized concrete drainage pipes. Its diameter range is300mm-1200mm. Its standard length is 2-3m. It can also produce reinforced concrete cement pipes with flexible joints and pipe jacking without reinforced concrete cement pipes.

  • Radial extrusion cement pipe machine

    Radial extrusion cement pipe machine

    Vertical radial extrusion pipe manufacturing technology as a new type of pipe manufacturing technology has the greatest advantage of using dry and hard concrete, vertical production can be immediately demoulded.Instantaneous extrusion molding, each tubeonly 2 to 4 minutes, high production efficiency. The radial extrusion pipe-making machine issuitable for producing small and medium-sized concrete drainage pipes. Its diameter range is300mm-1200mm. Its standard length is 2-3m. It can also produce reinforced concrete cement pipes with flexible joints and pipe jacking without reinforced concrete cement pipes.

  • Automatic Rolling steel cage welding machine

    Automatic Rolling steel cage welding machine

    Roll welding machine is widely used in cast-in-place pile construction in large bridges, high-speed railway construction and other fields. Wire Cage welding machine is one of the most necessary equipment to produce reinforced concrete pipes. There is pushing style, another is the Pulling. Our company pipe cage welding machine is fully automatic operation, the whole production process only needs one person operation. Roll welding machine makes up of four systems: The Main rotary plate; Pushing wire Plate; Diameter changing structure; and Cooper welder, they are working, driven by the separate motor. The Variable Frequency speed control system regulated to make the spiral pitch, the angle of ball joint.

1234>Total 46 Records
Get the latest price? We'll respond as soon as possible(within 12 hours)

Privacy policy

Alibaba websita
Copyright © 2019 Tianjin Hongxing International Trade Limited. Company address: Xishan Road Industrial Research Institute, Lubei District, Tangshan City, Hebei Province, China. Email: helen12.27@hotmail.com