The surface of the aluminized and galvanized steel coil is characterized by smooth, flat and gorgeous stars, and its base color is silver-white. The special coating structure makes it have excellent corrosion resistance. The normal service life of aluminized galvanized sheet is up to 25a, and its heat resistance is good. Aluminized Zinc Coils can be used in high temperature environment at 315 C. The adhesion between coating and paint film is good, and it has good processing performance. It can be punched, sheared and welded. The surface conductivity is very good.

Steel C Channel is a kind of building material used to support modelling and fixing structure. It is widely used in hotels and terminal buildings. Passenger station, station, theatre, shopping mall, factory, office building, old building renovation, indoor decoration, roof and other places. Keel is the skeleton and base material of decoration, which is widely used.

1.Width: 600~1500mm 2.Special Use: High-strength Steel Plate 3.Length: Customer's Requirement

Pre-painting Galvanized Iron Panel is used special steel coil as raw material and surfaces (covered with) is painted a layer of organic polymer (or polymer print film),which has advantages ofmetal material and the organic polymer. Not only good adhesive of Organic polymer,formability,corrosion resistance,decorative,but also high strength and easy processing,can be easily punching,bending,deep drawing,welding,etc. So it has perfact practicality,decorative,workability,durability.Currently,the PCM is produced by print film roller coating process and roller painting.

Product name: Corrugated Galvanized Roofing Steel Sheet Standard: AISI, ASTM, BS, DIN, JIS, GB Grade: SGCC Thickness: 0.12-1.2mm Model Number: 0.12-2.0mm*600-1250mm Type: Steel Plate Technique: Cold Rolled Surface Treatment: Galvanized Application: roofing, roof Special Use: High-strength Steel Plate Width: 600-1250mm Length: 1000-6000mm Steel Grade: SGCC

Types of Steel PC Bar:7.1MM steel PC bar,10.7MM steel PC bar,9.0MM steel PC bar,12.6MM steel PC bar,Prestressed concrete bar. Steel PC Bar is one of the main products of our company, which is exported to South Asia, Europe, Africa and other markets. The annual sales of Steel PC Bar amount to 1 million tons. Steel PC Bar is applied to building materrialPrestressed concrete steel bar Applied to High-strength and stress tubular pile, pole, elevated bridge pier.ect

Steel Strip with thinner thickness, narrower width and longer length. Its width is generally between 20 mm and 200 mm. Volume supply, specifications expressed in thickness * width. According to the quality of steel, it can be divided into high quality and common strip, hot rolling and cold rolling, which are called hot rolling strip and cold rolling strip respectively. Hot-rolled common strip is 2 mm-6 mm thick, cold-rolled strip is 0.05 mm-3.60 mm. Strip steel can be made of plain carbon steel, carbon-bonded steel, spring steel, tool steel, stainless steel, etc. Widely used in manufacturing welded pipe, clamp, washer, spring blade, saw blade, blade, etc.

Cold rolled steel coil is the steel produced by cold rolling. Cold rolling is the process of further rolling steel sheet to target thickness at room temperature. Compared with hot-rolled steel sheet, cold-rolled steel sheet is more precise in thickness, smooth and beautiful in surface, and has various superior mechanical properties, especially in processing performance. Because the cold-rolled coil is brittle and hard, it is not suitable for processing, so the cold-rolled steel plate usually requires annealing, pickling and surface leveling before being delivered to customers. The maximum thickness of cold rolling is less than 0.1-8.0MM, for example, the thickness of cold rolled steel plate in most factories is less than 4.5MM, and the minimum thickness and width are determined according to the equipment capacity and market demand of each factory.

H-section steel is a kind of economic section high-efficiency profile with more optimized section area distribution and more reasonable strength-weight ratio. It is named because its section is the same as the English letter "H". Because H-beam is arranged at right angles in all parts, H-beam has the advantages of strong bending resistance, simple construction, cost saving and light weight in all directions, and has been widely used.

Steel C Channel is a kind of building material used to support modelling and fixing structure. It is widely used in hotels and terminal buildings. Passenger station, station, theatre, shopping mall, factory, office building, old building renovation, indoor decoration, roof and other places. Keel is the skeleton and base material of decoration, which is widely used. The light steel channel is light in weight, which provides a convenient transportation operation and has more useful function in construction. Light steel channel is made of corrosion-resistant material, which is not rusty and corrosive, and has a long service life.

There are mainly four types of U-shaped steel produced in China: 18U, 25U, 29U and 36U. However, U18 is seldom produced because of its low carrying capacity. In GB/T 4697-2008, in addition to the four types of U-shaped steel in Shangzhu, another 40U model was added. Channel steel can be divided into ordinary channel steel and light channel steel. And according to the shape, it can be divided into four kinds: cold-formed equal-side channel steel, cold-formed unequal-side channel steel, cold-formed inner-side channel steel, cold-formed outer-side channel steel.

Keel is a kind of building material used to support modelling and fixing structure. It is widely used in hotels and terminal buildings. Passenger station, station, theatre, shopping mall, factory, office building, old building renovation, indoor decoration, roof and other places. Keel is the skeleton and base material of decoration, which is widely used. There are many kinds of keel, which can be divided into wood keel, light steel keel, aluminium alloy keel, steel keel and so on