Cast Iron Elbow Pipe fitting, also known as elbow repair device, elbow plug, is a kind of emergency repair and plug for elbow itself or elbow and pipe joint leakage. Elbow Half fitting is mainly 90 degree elbow Half fitting . Cast Iron Elbow Pipe fitting structure: Elbow Huff fitting adopts upper and lower structure, lined with sealed rubber, directly aligned to the elbow position, locking bolts can be used. The ends of the elbow are stuck in the pipe, and the leaky elbow is wrapped in it.

Socket pipe repair section is a device for rush repair of leakage at the socket of the connection between two pipes. Pipe repair sectionis a device for rush repair of parts other than sockets. The device is simple in structure and consists of only two bodies and two rubber pads. Cast iron pipe fitting is easy to install and only pairs of two bodies. The emergency repair of pipeline can be completed by tightening the nut at the leaking point. The device can save the time of water shutdown and reduce the cost of emergency repair.

Pipe clamp refers to a kind of pipe fittings commonly used in water heating installation, which is used to fix pipes and ground (note that the geothermal ground or the location of pipes on the ground can not be fixed by drilling holes). The loops do not go inside the gypsum line, and the pipes for leveling the ground should also be fixed.

Product Application Pipe repair clamp / pipe fitting/leak repair clamp for repairing defects, dents, gouges, corrosion, and leaks in water pipelines. It is a costly and resource-intensive task and restoring pipelines to their maximum operating pressure without having to replace the entire section. It is new design and very easy to install with water pressure. No need turn off water supply.

Vertical radial extrusion pipe manufacturing technology as a new type of pipe manufacturing technology has the greatest advantage of using dry and hard concrete, vertical production can be immediately demoulded.Instantaneous extrusion molding, each tubeonly 2 to 4 minutes, high production efficiency. The radial extrusion pipe-making machine issuitable for producing small and medium-sized concrete drainage pipes. Its diameter range is300mm-1200mm. Its standard length is 2-3m. It can also produce reinforced concrete cement pipes with flexible joints and pipe jacking without reinforced concrete cement pipes.

Vertical radial extrusion pipe manufacturing technology as a new type of pipe manufacturing technology has the greatest advantage of using dry and hard concrete, vertical production can be immediately demoulded.Instantaneous extrusion molding, each tubeonly 2 to 4 minutes, high production efficiency. The radial extrusion pipe-making machine issuitable for producing small and medium-sized concrete drainage pipes. Its diameter range is300mm-1200mm. Its standard length is 2-3m. It can also produce reinforced concrete cement pipes with flexible joints and pipe jacking without reinforced concrete cement pipes.

Forklift is an industrial transport vehicle, which refers to a variety of wheeled transport vehicles for loading and unloading, stacking and short-distance transportation of palletized goods. The international organization for standardization, known as industrial vehicles, is often used to transport large storage items, usually powered by fuel engines or batteries.

Forklift is an industrial transport vehicle, which refers to a variety of wheeled transport vehicles for loading and unloading, stacking and short-distance transportation of palletized goods. The international organization for standardization, known as industrial vehicles, is often used to transport large storage items, usually powered by fuel engines or batteries.

PLD series concrete batchingmachine is a kind of automatic batchingequipment which is used in combination with the mixer. lt can automaticallycomplete the batching process of sand, stone, cement and other materialsaccording to the concrete proportion set by the user. This machine has the characteristics of accurate weighing, high precisionof batching, high speed and accurate control function, etc. It is flexible incombination with the corresponding mixer, and convenient in movementand inslat It is an ideal equipment for producing high quality concrete.

PLD series concrete batchingmachine is a kind of automatic batching equipment which is used in combination with the mixer. lt can automatically complete the batching process of sand, stone, cement and other materials according to the concrete proportion set by the user. This machine has the characteristics of accurate weighing, high precisionof batching, high speed and accurate control function, etc. It is flexible incombination with the corresponding mixer, and convenient in movementand inslat It is an ideal equipment for producing high quality concrete.

Tension machine is a kind of feedthrough pre-tensioing jack with a tension rod in the center, having 4 types of tensioning strength, namely: 1000 KN, 2000 KN, 3000 KN, 4000 KN. As the end of the tension rod is connected to the anchor with thread, it can be applied to various forged anchors, chilled iron anchor used for stayed-cable bridge and other similar anchors, as well as pre-tension pulling for pipes. In accordance with actual requirement, the support of two heavy-weight jacks can be replaced with a baseplate and rolling hinged bearing provided by the manufacturer, to be used as a vertical jack, or for horizontal pushing during installation. The customer can also demand a change in thread specifications for the connection of the anchor to enlarge the scope of application.

Tension machine is a kind of feedthrough pre-tensioing jack with a tension rod in the center, having 4 types of tensioning strength, namely: 1000 KN, 2000 KN, 3000 KN, 4000 KN. As the end of the tension rod is connected to the anchor with thread, it can be applied to various forged anchors, chilled iron anchor used for stayed-cable bridge and other similar anchors, as well as pre-tension pulling for pipes. In accordance with actual requirement, the support of two heavy-weight jacks can be replaced with a baseplate and rolling hinged bearing provided by the manufacturer, to be used as a vertical jack, or for horizontal pushing during installation. The customer can also demand a change in thread specifications for the connection of the anchor to enlarge the scope of application.